上海西皇电气设备有限公司
联系人 ：高飞（销售/维修经理）
24小时服务热线 ：
传真（Fax）：
商务（ Q Q ）：137395471
地址（Add）：上海市金山区枫泾镇泾波路375号
-----------------------------------------------
上海西皇电气设备有限公司，
公司一直致力于推广西门子高性能自动化系统和驱动产品，所经营产品范围：LOGO!通用模块、SIMATIC S7全系列可编程控制器、PCS7 控制系统、WINCC组态软件、STEP 7编程软件和博图软件； 触摸屏、工控机、网络交换机、开关电源；6RA70/80系列直流调速装置，MM4、V20、G120、G130、G150、S120等全系列变频器；V90伺服产品，数控系统等工业自动化与驱动技术全系列产品。公司所备各类产品齐全，货量充足，能够满足客户对现货的需求，保证工程进度。
请相信上海西皇自动化科技有限公司是您忠诚的长久的合作伙伴，我们愿与广大客户携手向前，共同进步！
The CP 1542SP-1 communications processor connects the ET 200SP Distributed Controller with Industrial Ethernet networks.
The module can also be used for integrating the ET 200SP Distributed Controller into an IPv6-based network. All functions are configured using STEP 7 Professional V14 (TIA Portal) or higher.
The CP 1542SP-1 supports the following communication services:
-
PG/OP communication
-
S7 communication
-
Open communication (Open User Communication)
-
IT communication
-
FTP functions (File Transfer Protocol FTP/FTPS) for file management and access to data blocks in the CPU (client and server function)
-
Sending emails via SMTP for authentication on an email server (also with IPv6)
-
SNMPv1 for transfer of network analysis information
-
Integration of the ET 200SP Distributed Controller into IPv6-based networks
Benefits
-
Network separation for setting up identical machines with the same IP addresses
-
Optimum support of maintenance due to
-
Simple diagnostics via the central web server
-
Monitoring with IT network management tools (SNMP)
-
Module replacement without a PG
-
Securing the system against unauthorized access with
-
Central access protection for any S7 station
-
Access to the central web server
-
Simple alerting by e-mail
-
Protection of investment thanks to simple integration of the ET 200SP Distributed Controller in existing networks with SIMATIC S7-300 / S7-400 via Industrial Ethernet using the CP 1542SP-1
-
Accessibility of the ET 200 SP Distributed Controller from an IPv6-based infrastructure
Area of application
The CP 1542SP-1 is used for connecting the ET 200SP Distributed Controller to Industrial Ethernet networks. With its own processor, it relieves the CPU of communication tasks.
The CP 1542SP-1 offers possible communication with:
-
PGs/PCs,
-
master computers
-
operator control and monitoring systems,
-
SIMATIC S7 systems
The CP 1542SP-1 is used in the ET 200SP system to operate lower-level networks separately, or to implement a separation from the higher-level network.
Application: automation network and lower-level networks are to be operated separately
Design
The CP 1542SP-1 has all the advantages of the ET 200SP design:
-
Compact, space-saving design:
-
Module powered via separate power supply
-
Three LEDs for displaying the operating state and communication state of the module as well as LEDs on the bus adapter.
-
Can be operated simultaneously with BA Send module and CM DP module.
-
Simple installation:
The CP 1542SP-1 is mounted on the ET 200SP DIN rail and is connected to the adjacent modules via the backplane bus.
-
The BusAdapter (not included in scope of delivery) makes various connection methods possible;
-
For standard environmental conditions, BA 2xRJ45 for connection via RJ45 connector
-
For mechanical loading during operation and/or increased EMC requirements
BA 2xFC, BA 2xLC, BA LC/RJ45, BA LC/FC, BA 2xSCRJ, BA SCRJ/RJ45, BA SCRJ/FC
-
The CP 1542SP-1 can be operated without a fan; no backup battery is required.
-
The module can be replaced without the need for a programming device.
-
The CP can be equipped with an equipment labeling plate.
-
Optional labeling using light gray or yellow labeling strips. There is a choice of 2 materials:
-
Film and roll with 500 strips, for thermal transfer roll printer
-
Paper (280 g/m2), DIN A4 sheets with 100 strips each, for laser printer
Scope of delivery:
CP 1542SP-1, 24 V DC connector (BusAdapter must be ordered separately)