机械特点Main Features
1.直列螺杆式射出装置。
2. 3段温度控制、射速、背压、螺杆转速无段调整适合各种精密工程塑胶之零件成型。
3.下模固定上型活动式，对于镶入物品有良好之定位性，并有成品顶出装置。
4.低压关模装置保护模具安全。
5.料管可升降，清料头方便，固定模具更容易。
6.可加装单模用滑板，或双模交替式滑板，以增加作业性及效率性。
7.两组射出装置用于两种颜色成型，产品品质好，效率高。
8.加装圆盘式交替滑模。多个下模在一平面上前后交替，一模成型工作，其余模在外部做镶入工作，作业安全性高，又可大幅提高工作效率。成品顶出在外部完成。
成型范围：
汽摩工程塑胶件/工具外包/旅行饰品/日用化妆品容器/电子连接器/汽车饰品等……
1、Vertioncal RETRACTABLE screw injection unit.
2、3barrer temperature control zones,Lndependent settings for screw speed,injection pressure,and back pressure assire excellent REPEA-TABILTY and precise control.
3、Stationary lower half with hydraulic ejection assures a vibration free work area.
4、Low pressure control standard.
5、Material pipe can be elevated.
6、The Series may be purchased with a shuttle table or with a single mold slid to move the work into an open area for ease of loading,unloading or autmation through the use robotics or special equiment.
7、Two projectionsequip to used for two kinds of colors’model, the product quality good,the efficiency is high.
8、Can be supplied with a shuttle tableor rotary table.The ablve will allow the manufacturer to load and unload cores or inserts while the molding machines is auto matically performing another molding process.
如想了解更多注塑工艺及注塑机性能，请致电郑经理或加微信zdl88088咨询，24小时服务!