本机床是一种加工多角对边的先进机床，该机床效率高投资少，操作简单方便，是各厂矿工企业加工行业的理想设备。机床刀盘已分成装刀方孔，如需要加工对边，只要装上一把刀，四边装上对直二把刀，六边装上均分三把刀，八边装上均分四把刀，十二边装上均分六把刀，但刀安装进出必须相齐，否则会出现偏心。
对边大小调节根据产品大小先初步确定产品飞刀距离，再调整床头下面手轮进出，调整完毕后，把床头下面导轨锁住即可。
The machine is an advanced machine for equilateral polyhedron processing.With less investment,high seeicient and simple
operation,it becomes the ideal processing equipment to those enterprises.
The machine carriage has been dicided into some square holes to put the knives.If need to process the equilateral sides,
just equip the knife.Such as using one knife to make two sides,using two knifes to make four sides,using three knifes to
make six sides,four knifes to make eight sides,and six knifes to make twelve sides,but the way to equip the knife should be
in alignment,otherwise it will be eccentric.How to adjust the size of equilateral sides:according to product size,first confirm
the distance between products cutter, then adjust the in and outs of the handwheels under the machine,finally lock the
guide under the machine.